| Alloys available as Extrusions | |||||||||||||||||
| Alloy | Composition | Temper or | Principal Specification and its Requirements | Other | Expected Minimum | Typical | Resistivity | Thermal | Alloy | ||||||||
| (Nominal) | Condition | BS Spec'n | Size | 0.2% Proof | Ultimate | Minimum % | Elongation | British Units | Related | Ultimate | Ultimate | Brinell | (at 20oc) | Conductivity | |||
| International | Stress | Tensile | on | on | 0.2% Proof | Ultimate | Spec'n | Bearing | Sheer | Hardness | International | ||||||
| Designation | Stress | 5.65ÖSo | 50mm | Stress | Tensile | Stress | Stress | Number | Designation | ||||||||
| Alcan | Stress | Alcan | |||||||||||||||
| Percent | N/mm2 | N/mm2 | Tonf/in2 | Tonf/in2 | N/mm3 | N/mm2 | microhm cm | W/moC | |||||||||
| General Purpose Alloys | |||||||||||||||||
| Unalloyed Aluminium | |||||||||||||||||
| 1200 | Al-99.0 | M | E1C | All Sizes | 60 | 20 | 18 | 3.9 | V1C/3L34 | 120 | 35 | 20 | 2.9 | 222 | 1200 | ||
| 2S | 2S | ||||||||||||||||
| Heat Treatable | |||||||||||||||||
| 6063 | Al-Mg Si | M | HE9 | >200mm | 100 | 13 | 12 | 6-5 | HV9 | 200 | 60 | 3.4 | 218 | 6063 | |||
| 5OS | TB | >150mm | 70 | 130 | 16 | 14 | 4.5 | 8.4 | HV9/327B | 260 | 80 | 45 | 3.6 | 180 | 5OS | ||
| 150-200mm | 70 | 120 | 13 | 4.5 | 7.8 | HV9/2B | 240 | 70 | 45 | 3.6 | 180 | ||||||
| TE | >25mm | 110 | 150 | 8 | 7 | 7.1 | 9.7 | HV9 | 300 | 90 | |||||||
| TF | >150mm | 160 | 185 | 8 | 7 | 10.4 | 12.0 | HV9 | 370 | 110 | 75 | 3.5 | 180 | ||||
| 150-200mm | 130 | 150 | 6 | 8.4 | 9.7 | HV9 | 320 | 80 | 75 | 3.5 | 180 | ||||||
| 6082 | Al-Si Mg Mn | TB | HE30 | >150mm | 120 | 190 | 16 | 14 | 7.8 | 12.4 | HV30 | 380 | 115 | 60 | 3.9 | 180 | 6082 |
| B51S | 150-200mm | 100 | 170 | 13 | 6.5 | 11.0 | HV30 | 340 | 100 | 60 | 3.9 | 180 | B51S | ||||
| TF | >20mm | 255 | 295 | 8 | 7 | 16.5 | 19.1 | HV30 | 590 | 175 | 95 | 3.7 | 189 | ||||
| 20-150mm | 270 | 310 | 8 | 17.5 | 20.0 | HV30 | 620 | 180 | 95 | 3.7 | 189 | ||||||
| 150-200mm | 240 | 280 | 5 | 15.5 | 18.1 | HV30 | 560 | 165 | 95 | 3.7 | 189 | ||||||
| Electrical Conductor Alloys | |||||||||||||||||
| 1350 | Al 99.5 | M | BS2898 | All Sizes | 60 | 25 | 23 | 3.9 | 120 | 35 | 2.803 | 226 | 1350 | ||||
| C1S | E1E | C1S | |||||||||||||||
| 6101A | Al-Mg Si | TF | BS2898 | All Sizes | 160 | 185 | 8 | 7 | 10.4 | 12.0 | 370 | 110 | 3.133 | 218 | 6101A | ||
| D50S | E91E | D50S | |||||||||||||||
| Bright Anodising Alloy | |||||||||||||||||
| 6463 | Al-Mg Si | TB | BTR.E6 | >50mm | 75 | 125 | 16 | 4.9 | 8.1 | 250 | 70 | 6463 | |||||
| C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S | C50S |